• State-of-the-art Stroboscope System, designed specifically to inspect printed labels on moving webs at high speeds.
• The strobe lamp can be synchronized with each label, providing a "stand still" effect.
• Brilliant light output at all flash rates.
• Uniform coverage throughout field of view.
• Accuracy
• Dependability
• Versatility
• Safety
• Effective for inspection on one of our rewind machines, or directly on press.

• Industrial duty, with long flashtube life.
• Rugged floating-arm lamp.
• Test Mode selector switch to test flashtube.
• Built-in manual flash rate, adjustable by turning a knob on the back of the lamp.
• Self-compensating power supply provides steady flash and constant illumination (no false triggering or missing flashes).
• Master/slave flash synchronization possible with two or more systems.
• Optocoupled trigger input for external synchronization devices (provides noise immunity).
• Operator protection feature safely discharges power supply and all components when the system is turned off or when power is disconnected.

Most strobe light systems are intended for a wide range of applications and have characteristics that are less than ideal for high-speed label inspection. Every detail in this system is optimized specifically for inspection of narrow web printed products.

TRIGGER OUTPUT
This feature allows you the flexibility for master/slave synchronization when you have two or more inspection systems.

An open collector output that is synchronized to the flash signal is available at the rear of the control unit. By attaching a trigger output cable between the output and the input of a second strobe control, you can synchronize the second strobe with the first.

Additional strobes can be connected in this manner, and any number of systems can be triggered from a single input signal to the first control. The trigger output can also be used to provide signals to digital counters, rate meters, etc.